服务热线:13833873456 / 13833870139
中文   |  English
API

    What is API RP 13C (ISO 13501)?

    A physical testing and labeling procedure for shaker screens. To be API RP 13C compliant, a screen must be tested and labeled in accordance with this recommended practice. Internationally, API RP 13C is known as ISO 13501. 

    API RP 13C (ISO 13501) Compliance Tests

    To meet API RP 13C compliance two tests are required: cut point and conductance. API RP 13C allows the end user to compare by cut point, conductance (fluid flow), and non-blanked open area. The cut point test is based on a time-proven testing method used by ASTM to classify particles by size. The shaker screen designation is identified by matching the screen’s cut point to the closest ASTM sieve cut point. The D100 separation is used for assigning screen designations . D100 means that 100 percent of the particles larger than the test screen will be retained, and all finer particles will pass through. The conductance test measures the ability of a fluid to pass through the screen. The non-blanked open area of a screen describes the net unblocked area (in square meters or square feet) available to permit the passage of fluid.

    After identifying the cut point and conductance, API RP 13C requires application of a permanent tag or label to the screen that is visible and legible . Both cut point, expressed as an API number, and conductance shown in KD/mm are required on the screen label.

    The new procedure is a revision of the previous API RP 13E, which was based on optical measurements of the screen opening using a microscope and computer analysis. Under API RP 13E, screen designations were based on individual manufacturer test methods which produced inconsistent labeling.

 

API RP 13C (ISO 13501) CUT POINT NUMBERS

D100 Separation (Microns)

API Screen Number

>780,0 to 925,0

API 20

>655,0 to 780,0

API 25

>550,0 to 655,0

API 30

>462,5 to 550,0

API 35

>390,0 to 462,5

API 40

>327,5 to 390,0

API 45

>275,0 to 327,5

API 50

>231,0 to 275,0

API 60

>196,0 to 231,0

API 70

>165,0 to 196,0

API 80

>137,5 to 165,0

API 100

>116,5 to 137,5

API 120

>98,0 to 116,5

API 140

>82,5 to 98,0

API 170

>69,0 to 82,5

API 200

>58,0 to 69,0

API 230

>49,0 to 58,0

API 270

>41,5 to 49,0

API 325

>35,0 to 41,5

API 400

>28,5 to 35,0

API 450

>22,5 to 28,5

API 500

>18.5 to 22,5

API 635

 


关于我们
新闻分类
联系我们
服务热线
0318-7522139
地址:河北省安平县新盈西街267号院内第四排
联系人:王海朋
手机:13833873456 / 13833870139
传真:0318-7519789
邮箱:admin@wirebx.com
关注我们官方微信

关注我们官方微信

主要生产石油用振动筛网,泥浆泵活塞,不锈钢网,钢格板,过滤网,电焊网,护栏等系列丝、网及丝网深加工产品
Copyright © 2019  河北博星石化设备有限公司  All rights reserved.     备案号:  冀ICP备15015943号-1   后台登录
技术支持:嘉诚网络